Item Tag: 1.75 mm

SUNLU 5KG Standard/Water Washable/ABS-Like/Nylon-Like/Plant-Base UV 405nm Resin

Standard Photopolymer Resin Water Washable Resin PA-Like Resin Plant-Based Resin ABS-Like Resin Surface Hardness (Shore D) 80-85 80-85 75-80 80-85 70-80 Body Contraction （%） 7%-9% 6%-8% 6%-8% 7%-9% 6%-8% Tensile strength （MPa） 20-40 30-50 20-45 20-35 20-35 Elongation at break （%） 5-15% 8-14% 20-50% 5-12% 15-25% Bending strength （Mpa） 25-45 35-55 20-50 20-40 20-40 Bending modulus （Mpa） 650-900 800-1100 650-900 600-800 600-800 Bottom exposure time (s) Color screen machine 20-80； black and white screen machine 10-60 Color screen machine 30-80； black and white screen machine 10-60 Color screen machine20-80； black and white screen machine 10-60 Color screen machine20-80； black and white screen machine 10-60 Color screen machine20-80； black and white screen machine 10-60 Ground floor number 3-5 3-5 3-5 3-5 3-5 Normal exposure time (s) Color Screen Machine 4-15； Black and White Screen Machine 2-4 Color Screen Machine 4-12； Black and White Screen Machine 1.5-3.5 Color Screen Machine 4-12； Black and White Screen Machine 1.5-3.5 Color Screen Machine 5-15； Black and White Screen Machine 2-4 Color Screen Machine 4-12； Black and White Screen Machine 1.5-4 Lifting distance (mm) 6-10 6-10 6-10 6-10 6-10 Lifting speed (mm/min) 60-120 60-120 60-90 60-120 60-90 Precautions: 1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;2. Do not take it orally, keep it away from children, wear gloves before use, avoid direct contact with the skin, and keep the room ventilated; do not enter the eyes, in case of accidental contact, rinse with plenty of water as soon as possible.3. The printed resin model needs to be cleaned with high-concentration alcohol (recommended above 95% concentration, the higher the better) for about 30s; after cleaning, wait for the alcohol to dry and then perform secondary curing, so that the best performance can be obtained;4. Do not pour the used resin in the trough back into the unused resin, and do not leave the resin in the trough for a long time without use. The contamination of the resin affects the printing effect;5. Store in the dark at room temperature. The ultraviolet rays in the sun will cure the photosensitive resin; it is recommended to store it at an ambient temperature of 15-35 °C. The lower the temperature in winter, the higher the resin viscosity;6. Sealed storage to avoid dust or moisture, which will affect the print quality Payment We accept PayPal only!!! Delivery details 1.Goods will be delivered within 5 working days after the payment received 2.We ship the items according to your Paypal address except the special notes from buyers ! 3.Be sure that your Paypal address is correct when you buy the items in ebay. 4.We do not take responsibility for item loss due to wrong address. 5.We are not responsible for any customs duty incurred at foreign customs.If you want to ship in other way, please contact us. Returns 1. Buyers must contact us within 30 days upon receiving the item(s), buyers should be responsible for the shipping cost for sending item(s) back and the shipping cost for re-sending the new item(s). 2. Please keep our products in original condition (packaging) if you return the item(s). If your item arrives faulty, we will exchange it for a replacement. 3. If you prefer a refund, we will fully refund to you through Paypal when we get the item. Contact The best way to contact us is by eBay messages.We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday – Friday 9:00 am to 6:00 pm HKT except all Holidays)Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.We commit you 100% satisfaction guarantee. Feedback 1. We will appreciate a positive feedback with all 5 star rating when you are satisfied. 2. Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us. 3. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. 4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.On Sep 2, 2024 at 21:27:24 PDT, seller added the following information:

Creality PLA Filament 1.75mm White & Black Ender PLA 3D Printer Filament 2 Pack

 About this item     【Unbeatable Cost-Effectiveness】The Creality Ender-PLA Filament Value Pack is your cost-effective solution without compromising on quality. You will get 2 spools of high-quality PLA filament 1.75mm, net weight 1kg(2.2lbs)/spool.     【Effortless Warping-Free Printing】With ender pla, an environmentally friendly PLA material, printing models becomes a breeze. Its low shrinkage properties ensure smooth, hassle-free printing without any worries about warping.     【Neat Coiling with No Tangles】The precise filament diameter and automatic EPC winding guarantee a neat PLA filament, enabling smoother feeding and printing.     【Smooth Printing with No Clogging】The use of raw materials that are high in purity and free of impurities ensures excellent fluidityCreality PLA Filament 1.75mm 2kg Ender PLA 3D Printer Filament For Ender Series About this item 【Unbeatable Cost-Effectiveness】The Creality Ender-PLA Filament Value Pack is your cost-effective solution without compromising on quality. You will get 2 spools of high-quality PLA filament 1.75mm, net weight 1kg(2.2lbs)/spool. 【Effortless Warping-Free Printing】With ender pla, an environmentally friendly PLA material, printing models becomes a breeze. Its low shrinkage properties ensure smooth, hassle-free printing without any worries about warping. 【Neat Coiling with No Tangles】The precise filament diameter and automatic EPC winding guarantee a neat PLA filament, enabling smoother feeding and printing. 【Smooth Printing with No Clogging】The use of raw materials that are high in purity and free of impurities ensures excellent fluidity, allowing the filament to be extruded evenly and smoothly throughout the printing process. This eliminates the risk of nozzle clogging and enhances the overall quality of the printed output. 【Verified by BFP–Perfectly】Compatible with Creality Printers (Ender series, CR series, Fully-Enclosed series) and 99% of FDM printers in the market. 【2 Pack】Package included 1 x black & 1 x white Creality Ender PLA 3d printer filament.BrandCrealityProductGroupOffice ProductNumberOfItems2ModelPLA 2KGMPNDoes Not ApplyColorWhite+black-2kgTypeEnder PLAMaterialPLAFilament Diameter1.75 mmCompatible ModelEnder series, CR series, Fully-Enclosed series ectCountry/Region of ManufactureChinaManufacturer Warranty1 YearModel NumberEnder-PLA Value PackShelf Life1years

WINSIN 30mm RGB Fan 5V for 3D Printers – Pack of 4

Enhance your 3D printing experience with the WINSIN 30mm RGB Fan. This micro-sized, lightweight fan is designed to provide efficient cooling for various 3D printer components, including extruders and hotends.

SUNLU PLA PLA+ PETG SILK ABS TPU 3D Printer Filament 1.75mm 1KG/0.25KG Non-toxic

About this item ➽【Toughness plus = SUNLU , Say No to Brittle 】SUNLU no as brittle as normal PLA. Better toughness, brighter color, higher strength；lower shrinkage, lower warping; SUNLU filament more easier to print, and odorless, making good print results. ➽【1.75mm 1KG Pack Vacuum Pack Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging. ➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. ➽【High Precision +/- 0.02mm Tolerance】: 1.75mm 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy. ➽【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources. Filament Type PLA PLA+ SILK ABS PETG PLA+ PLA Meta TPU Nozzle Temp. 205-230℃ 230-270℃ 220-250℃ 210-235℃ 180-200℃ 205-230℃ Print Speed 50-100mm/s 50-100mm/s 50-100mm/s 50-100mm/s 50-100mm/s 50-100mm/s 20-40mm/s Platform Temp 60-80℃ 80-120℃ 70-80℃ 50-65℃ No heating required Tolerance 1.75mm+/-0.02mm Net Weight 1KG/ 0.25KG 1KG/ 0.25KG 1KG 1KG 1KG 1KG/ 0.25KG 0.5KG SUNLU PLA 3D Printer Filament SUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing. It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces. FDM 3D Printer Material SUNLU filament is easier to print and it’s odorless, which gives you good printing results. And all our 3D printer filaments are vacuumed sealed along with a desiccant pack. Starch Raw Materials SUNLU 1.75 mm 3D filament is made of starch raw materials obtained from renewable plant resources such as corn. Good Versatility SUNLU 1.75 mm filament is compatible with popular 1.75mm FDM 3D printers,which help you DIY your imagination.

[BUY 10 PAY 6] ANYCUBIC 1KG PLA+/ PETG/ Silk/ Matte/ High Speed PLA 3D Filament

ANYCUBIC Filament Parameters Standard PLA Matte PLA Silk PLA Matte blau Silk PLA High Speed PLA PLA + PLA Glow PETG PLA Wood Material PLA PLA PLA PLA PLA PLA PLA PETG PLA Filament diameter ⌀ 1.75±0.02 ⌀ 1.75±0.03 ⌀ 1.75±0.02 ⌀ 1.75±0.03 ⌀ 1.75±0.02 ⌀ 1.75±0.02 ⌀ 1.75±0.02 ⌀ 1.75±0.02 ⌀ 1.75±0.03 Tensile strength /MPa 61 20.9 60.6 42~50 54 58 50 61.4 48.6 Stretch at break /% 3.1 34.5 6.3 2~4 12 3.6 21.7 5.3 8.1 Bending strength /MPa 83 39.6 65 70~80 74 73 79.8 74.8 58 Density /g/cm3 1.23 1.31 1.23 1.05~1.07 1.26 1.23 1.26 1.3 1.25 Heat deflection /℃ 53 52 53 75 56 53 53 63 53 Melting point /℃ 164 162.6 164 160 165 164 162 128 164 Melting index g/10min 4~10 14~20 7~15 30~40 4~6 4~10 6~12 8~16 8.5 Printing speed mm/s 50~100 30~70 40~60 40~80 50~150 150~300 300~600 50~100 40~60 40~60 40~60 Pressure temperature /℃ 200~210 190~230 205~215 200~230 190~210 210~230 230~260 205~215 195~205 230~240 205~215 Base plate temperature /℃ 50~60 45~60 50~60 60~80 50~60 50~60 50~60 60~70 50~60 Length /m 330 310 330 330 330 330 330 320 330 Anycubic PLA Filament Neat Winding Experience a hassle-free 3D printing process with Anycubic PLA Filament. Our meticulous winding technique minimizes filament tangles, guaranteeing a smooth, frustration-free printing experience. Say goodbye to interruptions and hello to flawless prints for all your creative endeavors. Even Filament Diameter With an impressive ±0.02mm diameter tolerance and consistently vibrant colors, we deliver the highest quality 3D printing experience. Enjoy unmatched reliability and color consistency throughout your creative journey. Eco-Friendly PLA is made from lactic acid, which is produced via starch fermentation during corn(or other plant) wet milling, it’s a biodegradable and eco-friendly material. Specifications Product Type PLA Net Weight 1kg/roll Diameter 1.75mm Tolerance ±0.02mm Length 340m Density 1.25g±0.05g/cm³ Tensile Strength 55MPa Hotbed Temperature 50-80°C Nozzle Temperature 200-210°C Toughness 81D Anycubic PLA+ Filament High Toughness Anycubic PLA+ Filament offers outstanding toughness and impact resistance, ensuring resilience under external pressure. Its smooth, low-layer printing capability makes it perfect for crafting detailed models, artwork, and precision engineering components. Outstanding Quality Experience flawless 3D printing with Anycubic PLA+ Filament. It ensures a seamless filament extrusion process, resulting in consistently refined prints, free from clogs or bubbles. The filament boasts precise winding and exceptional dimensional stability, with a controlled wire diameter tolerance of ±0.02mm. Its high precision and minimal shrinkage effectively prevent cracks and warping in your finished models. Models Display Product Type PLA+ Net Weight 1kg/roll Diameter 1.75mm Tolerance ±0.02mm Length 330m Density 1.23g/cm³ Tensile Strength 60MPa Elongation at Break 3.8% Flexural Strength 95MPa Flexural Model 4175MPa Young’s Modulus 3570MPa Izod Impact Strength 48KJ/m² Melting Point 164°C Melt Index 4~10g/10min Heat Deflection Temperature 53°C Storage Environment Dry and ventilated Anycubic PETG Filament Clear and Vibrant With a vibrant and vivid hue, the prints feature a smooth and delicate surface finish. They exhibit excellent clarity, appearing either semi-transparent or fully transparent when illuminated. This imparts a clear and aesthetically pleasing appearance to the models. Strong and Durable Anycubic PETG Filament is the ultimate choice for 3D printing enthusiasts seeking superior performance. With exceptional toughness and impact resistance, it stands strong against bending and collisions, ensuring longevity for mechanical parts and engineering models. This filament’s enhanced chemical and water resistance guarantees stability even in high humidity conditions and exposure to various chemicals and cleaning agents. Plus, its excellent adhesion ensures a consistently high success rate for your prints, making it a reliable choice for all your 3D printing needs. Outstanding Quality Without any clogging or bubbles, it guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model. The winding is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of ±0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping. Specifications Product Type PETG Filament Net Weight 1kg/roll Diameter 1.75mm Tolerance ±0.02mm Gross Weight 1.3kg Length 320m Density 1.3g/cm³ Tensile Strength 47MPa Elongation at Break 12% Flexural Strength 74MPa Flexural Modulus 3015MPa Young’s Modulus 2990MPa Izod Impact Strength 30KJ/m² Melting Point 128°C Melt Index 8~16g/10min Heat Deflection Temperature 63°C Storage Environment Dry and ventilated Anycubic Silk PLA Filament Anycubic Matte PLA Filament Anycubic High Speed PLA Filament Boosting Speed with High-Speed Core Unlock up to 10 times[1] faster output when you pair our High-Speed PLA Filament with a high-speed 3D printer. Designed as the ultimate companion to our Kobra 2 Series 3D Printers. Engineered to match the rapid pace of modern 3D printing technology. [1] The High Speed PLA supports a maximum speed of 500mm/s, compared to the standard printing speed of 50mm/s. Results printed using Anycubic Kobra 2 Pro. Data obtained from Anycubic’ s lab. for reference only. High Fluidity & Rapid Shaping Compared to standard PLA filaments the high-speed PLA filaments boast enhanced fluidity and better cooling effect, ensuring smooth and consistent feeding for filaments after melting and rapid model cooling and shaping. Efficiency Meets Quality Elevate your printing efficiency while maintaining impeccable results. Experience smooth and intricate surfaces on models, particularly on those challenging overhanging parts. Engineered with high toughness and minimal shrinkage, this filament ensures a superior level of quality for your printed creations. Specifications Filament Parameters Product Type High Speed PLA Net Weight 1kg/roll Diameter 1.75mm Tolerance +0.02mm Gross Weight 2.16KG Length 330m Density 1.25g/cm³ Tensile Strength 47.8MPa Elongation at Break 6.1% Flexural Strength 2863MPa Young’s Modulus 2834MPa Izod Impact Strength 6.7KJ/m² Melting Point 162.6°C Melt Index 16.27g/10min Heat Deflection Temperature 57.8°C Storage Environment Dry and ventilated Anycubic PLA Glow Filament Longlasting Glowing Effect Infused with fluorescent materials that absorb light energy, this filament offers an incredible 300% brightness boost and 200% longer glow duration compared to similar products on the market. Illuminate your prints and let them shine in the dark with unparalleled brilliance. Specifications Product Type PLA Net Weight 1kg/roll Diameter 1.75mm Tolerance ±0.02mm Length 340m Density 1.25g±0.05g/cm³ Tensile Strength 55MPa Hotbed Temperature 50-80°C Nozzle Temperature 200-210°C Toughness 81D Anycubic ASA PLA Filament Superior Weather Resistance, Fearless in Outdoor Conditions Outstanding resistance to sunlight, water, and aging. It can fend off UV rays, complex weather changes, and harsh natural environments. Printed models remain undamaged, resistant to aging and fading even after long exposure outdoors. High-Temperature Resilience, Models Do Not Deform Easily More stable in high temperatures compared to other standard materials. Anycubic ASA filament has a heat deformation temperature of up to 90°C, while ABS, PETG, and PLA have temperatures of 75°C, 63°C, and 53°C respectively. Excellent Mechanical Performance, High Toughness and Impact Resistance Printed models can withstand moderate impact forces without easily deforming or breaking, making it suitable for printing engineering parts or models needed in outdoor. Low Odor Compared to ABS filament, it emits a much lower odor during the printing process, reducing discomfort for those sensitive to smells, creating a more comfortable printing environment. High Quality No blockage or bubbles, ensuring smooth extrusion and finely uniform models. Neatly wound with consistent dimensions, filament diameter tolerance is controlled within ±0.02mm. High precision, low shrinkage, less risk of cracking and warping. Filament Parameters Product Type ASA Filament Net Weight 1kg/roll Diameter 1.75mm Tolerance ±0.02mm Gross Weight 1.3KG Length 395m Density 1.07g/cm³ Tensile Strength 41MPa Elongation at Break 15% Flexural Strength 62MPa Flexural Modulus 3292MPa Young’s Modulus 2220MPa Izod Impact Strength 90KJ/m² Melting Point 120°C Melt Index 12-23g/10min Heat Deflection Temperature 90°C Storage Environment Dry and ventilated On Jul 21, 2024 at 03:57:31 PDT, seller added the following information: